How to Fix Wood Furniture Water Damage?
Water can induce damage to the wood, varying from minor to primary. Water damage can be generated at any time, but the thing to believe is how you fix water damaged wood furniture in Dubai. Wood and water cannot go together; water exposure can make your wood soggy. The extent of harm caused by water will determine whether you need a professional or can deal with it yourself. In case of substantial damage, replacing a damaged part requires expert fixing, while warping, splitting, discolouration, and mould can be fixed by following the guide in this article.
Tips to Fix Water Damaged Wood Furniture
Here are some suggestions that have demonstrated helpful in restoring your water damaged wood furniture.
1-Inspect The Damage
The first thing you must do is read the damage on the wood veneer. The wood can be split, warped, discoloured, or have mould growth. Warping happens when the timber is exposed to water and becomes uneven.
Water exposure causes splitting, which is the reason for cracks; it can also cause discolouration, and if it is not dried at the right time, mould will start growing on its surface.
2-Allow it to Dry
After inspecting the damage, allow the wood to dry completely. Various methods can be used for drying the wood, such as placing it in a ventilated area or using a fan. A dehumidifier can also be used to ensure the wood dries completely. When using a fan to dry damaged wood, allow at least 12 hours for thorough drying. Use a microfiber cloth to clean any water stains.
3-Smooth the Surface
Now is the time to smooth the wood surface. Most people use sandpaper to make the character even and shiny. You can likewise use it but with proper safety protection, such as gloves, masks, and glasses.
You can use:
- Belt Sander
- Finishing sander
Use the belt sander for a refined surface like a tabletop, while the finished sander gives your wood a soft and crisp finish.
Check the rough and rough surfaces, use coarse-grit sandpaper to deal with the rough surfaces, and use finer-grit sandpaper to give a soft look. It is advised to stop its higher use because it could result in an uneven surface.
4-Apply Finishing
Now, if the surface is soft and even, apply defensive finishings. To protect your Outdoor wooden furniture from water and sunlight, apply protective coats of polyurethane. It is water-resistant, improves durability, and protects the wood from scrapes. It will give your table a polished and aesthetic look.
Other Ways to Treat Wood From Water Damage
Baking soda is an effective way to remove watermarks from wood veneers. To make a paste, mix equal amounts of baking soda and water. Apply the paste to the affected area, gently rub it onto the watermark, and let it sit for at least 10 minutes. It’s recommended that a patch test be performed to prevent any damage before using it directly on visible furniture surfaces for protection.
Highlighted Protection to Prevent Wood Furniture From Water Damage
Some adequate precautions are mentioned to protect your custom wooden furniture from water damage.
- Wipe out the water spills and splashes instantly with the help of a cloth. It will protect your wood material furniture from splitting and cracks.
- Use placemats under the dishes and glasses to protect your furniture from water damage.
- Avoid placing your furniture under direct sunlight. It could be a cause for bruises and cracks.
- Use protective coating and finishes on their surface. Keeping your furniture free from scratches and water stains will be best.
Final Words!
Wood furniture can be damaged by water exposure. Damages could include splitting, warping, and mould growth. You can quickly deal with these by inspecting the type of damage. Use an effective DIY method, let the wood dry before sanding, and apply a protective coating, which should be resistant to water and sunlight. These highlighted points will help you fix your wooden furniture. Keep in mind the essential tips to deter the wood from water damage.
